[Skip to main content](#main-content) [OpenNash Jobs](https://jobs.opennash.com/) [Hiring report](/reports/hiring/) · [All Safran jobs](https://jobs.opennash.com/companies/safran/) · [Search jobs](/search/) Safran # Technical Support (Milling and Turning) Listed on Safran’s official careers site. Posted June 1, 2026. Check that it is still open and apply there. [Apply on Safran’s careers site →](https://careers.safran-group.com/job/job-technical-support-milling-and-turning-_180851.aspx?LCID=1033) [OpenNash Jobs](https://jobs.opennash.com/) / [Safran](https://jobs.opennash.com/companies/safran/) / Technical Support (Milling and Turning) ## Job description ### Setup & CNC Machining - Set up and operate CNC machines safely and efficiently (primarily Haas) per engineering drawings, work instructions, and customer/company requirements. ### Perform job setup - install and align workholding (vise/fixture/soft jaws/chuck), load tools, set tool length/radius offsets, set work offsets and verify correct program/revision. - Support safe first-run execution using approved methods (dry-run, single block, reduced feeds) and ensure the process is stable before running production quantities. - Prepare raw stock (cut to size as required) and secure materials correctly for stable machining. ### Inspection & Quality - Perform first-piece and in-process inspections using calipers, micrometers, and gauges to confirm conformance to drawing requirements. - Record inspection results and complete traveler/route card documentation in English as required. - Identify and escalate trends such as dimensional drift, burr issues, surface finish issues, and repeatability concerns. - Follow documentation procedures for jig/fixture/program control and change managment. Deburring / Edge Condition Perform deburr and edge-break per work instruction and drawing requirements, ensuring no sharp edges, loose chips, or FOD risk, and that critical features are not altered. ### Troubleshooting & Continuous Improvement - Monitor machining performance (tool wear, chatter, finish, dimensional stability) and take corrective action within scope (offset adjustments, tool change, basic feeds/speeds adjustments) while following site rules. - Provide feedback to CNC programmers/supervisors regarding program performance, tooling needs, fixture improvements, and manufacturability concerns. - Machine Checks, Support Calibration Verification & Basic Maintenance (TPM) - Perform routine machine checks/calibration verifications per site procedure (e.g., warm-up routines, probe/toolsetter function checks where applicable, basic repeatability/condition checks). ### Perform basic preventative maintenance (TPM) - coolant level and concentration checks, chip management, cleaning, lubrication checks per checklist, and maintaining a safe/organized work area. - Report alarms, unusual vibration/noise, coolant issues, and suspected machine accuracy problems immediately. ### Design & Improvement of CNC Clamps/Fixtures - Design simple CNC fixtures/clamps (2D sketches / basic CAD if available), select standard components (clamps, pins, bushings, stops), and manage fabrication requests through the approved process. - Validate fixture designs through trial cuts and measurement, update designs based on results, and help standardize fixtures for repeat jobs. - Ensure fixture concepts support safe tool access, rigidity, repeatability, and efficient setup; coordinate with Tooling/Engineering for complex fixtures. ### General Expectations - Handle raw material and finished parts carefully to prevent damage (scratches, dents). ### Preferred Skills (Good to have) - Some experience with Mazak machines and/or Fanuc controls. - Exposure to 4-axis machining; 5-axis exposure is a plus. - Aerospace manufacturing experience. - Prior experience creating simple fixture sketches or improving work holding solutions. ### Education Technical Diploma or equivalent preferred; vocational machining certification/training is a plus. ### Experience 4–5 years experience in CNC machining environment (operator-to-machinist progression acceptable). ### Must-have - Hands-on experience with Haas CNC milling machines (setup and operation). Additional experience with Mill-Turn is preferable - Ability to read engineering drawings and follow work instructions; basic GD&T awareness is an advantage. ### Strong understanding of machining fundamentals - workholding basics, tooling, offsets, feeds/speeds fundamentals. - Competent in measurement tools (calipers and micrometers; height gauge a plus). ### Language (Required) - Basic English reading and writing to understand drawings/work instructions and complete machining/inspection records. ## At a glance - Posted by the employer: Jun 1, 2026 - First seen by OpenNash: Jul 31, 2026 - Last checked: Oct 19, 2026 - Listed for: 140 days[Apply on Safran’s careers site →](https://careers.safran-group.com/job/job-technical-support-milling-and-turning-_180851.aspx?LCID=1033) ## More jobs at Safran ### [Industrialization Team Leader](https://jobs.opennash.com/companies/safran/jobs/ed2952382e331d85617d/) ### [Technical Support(Punching)](https://jobs.opennash.com/companies/safran/jobs/9f4318bd52649fa75f27/) ### [Accounting and Costing Manager](https://jobs.opennash.com/companies/safran/jobs/d87676a06a03f97a5d0d/) ### [Chemical process Engineer](https://jobs.opennash.com/companies/safran/jobs/bb713ee1171d45c0c6d4/) ### [Electrical Engineer](https://jobs.opennash.com/companies/safran/jobs/09b3c45387b7e6daf79e/) ## Similar jobs at other companies ### [Student Worker – Turning Bid Archives into a Service Pipeline](https://jobs.opennash.com/companies/siemens/jobs/56bb1ddc2c7419f98127/) Siemens ### [Technical Support Advisor](https://jobs.opennash.com/companies/microsoft/jobs/be18eab7460f344ba78b/) Microsoft · Romania, Bucharest ### [Technical Support Advisory](https://jobs.opennash.com/companies/microsoft/jobs/1466e9e305153e76b7c0/) Microsoft · Mexico City, México ### [Technical Sales Support](https://jobs.opennash.com/companies/siemens/jobs/722c27075ead25e736bc/) Siemens ### [Technical Support Engineer](https://jobs.opennash.com/companies/eaton/jobs/64d403e8de988416e386/) Eaton · Casablanca, MAR OpenNash lists jobs from employers’ own careers sites and does not handle applications. Dates come from the employer where stated; “first seen” and “last checked” are our own observations. OpenNash Jobs · Official listings with dates and links to the employer. [Weekly hiring report](/reports/hiring/) · [Methodology](/methodology/)